Container type power stations are widely used in emergency power supply, field operations, temporary electricity use, and other scenarios due to their modular and highly mobile characteristics. To ensure its safe and efficient operation, the following precautions should be taken:
1、 Container type power station installation and location selection
Site requirements
The ground should be flat and solid, capable of carrying the full load weight of containers and equipment, and avoiding equipment tilting or damage caused by ground settlement.
The site should have good drainage performance to prevent water accumulation from corroding the bottom of the container or affecting equipment operation.
Stay away from hazardous sources such as flammable, explosive, and corrosive substances, ensure good ventilation, and facilitate heat dissipation.
Electrical and Grounding
Confirm that the external power grid voltage, frequency, and other parameters match the equipment, and plan the cable laying path reasonably.
The grounding resistance must meet the standards to ensure the safety of equipment and personnel.
Lifting and positioning
Use professional lifting equipment to lift containers, ensuring stability and avoiding collisions.
Adjust the levelness after positioning, and control the deviation within the allowable range.
2、 Container type power station operation and maintenance
Pre startup inspection
Container type power station fuel system: Check the oil level and quality, avoid using fuel with too much water or impurities, and regularly discharge water and sediment.
Container power plant cooling system: Confirm that the coolant level is normal and the radiator is not blocked.
Electrical system: Check the battery voltage and internal resistance to ensure that the terminals are clean and free of corrosion; Check if the cable connection is secure, free from looseness or overheating.
Mechanical components: lubricate door hinges, locks, etc. to ensure smooth operation.
Operation Monitoring
Real time monitoring of operating parameters (such as voltage, current, frequency, temperature, etc.), and timely adjustment of any abnormalities.
Regularly record equipment operation data to facilitate fault analysis and maintenance plan development.
Container type power station shutdown and maintenance
After stopping the container type power station, idle it for 5 minutes to cool down all components before turning off the power.
Regularly replace vulnerable parts such as engine oil and filters according to the manufacturer's recommended maintenance cycle.
Clean the surface and internal dust of the equipment, and keep the cooling system unobstructed.
3、 Container Type Power Station Security and Emergency
Fire and explosion prevention
Equip sufficient fire-fighting equipment (such as fire extinguishers, fire blankets, etc.) and regularly check their effectiveness.
Smoking or using open flames near the equipment is prohibited to avoid fuel leakage causing fires.
Protection against electric shock
Non professionals are prohibited from opening electrical equipment enclosures and must wear insulation protective equipment during operation.
Ensure that the casing of the container type power station is well grounded to avoid the risk of electrical leakage.
Container type power station emergency response
Develop emergency plans and conduct regular drills to ensure that personnel are familiar with the operating procedures.
In the event of a malfunction or accident, immediately cut off the power and dispose of it according to the plan.
4、 Special considerations for container type power station scenarios
field operations
Strengthen equipment fixation to prevent tipping due to wind or vibration.
Equipped with windproof, rainproof, and dust-proof measures to protect equipment from adverse weather conditions.
High altitude or low temperature environment
Use fuel and lubricants suitable for low-temperature environments to prevent fuel wax formation or lubrication failure.
Increase the preheating time of the equipment to ensure smooth startup.
Wet environment
Strengthen waterproof measures for equipment to prevent electrical components from getting damp and short circuiting.
Regularly check the insulation performance of equipment to ensure safe operation.
When using a container type power station, it is important to establish a device operation log that records information such as startup, shutdown, maintenance, and malfunctions. Save equipment manuals, maintenance manuals, inspection reports, and other documents for easy reference and management. By strictly adhering to the above precautions, the usage time of container type power stations can be effectively extended, the failure rate can be reduced, and it can be ensured to operate safely and reliably in various application scenarios. container type power station
More information on container type power stations:http://www.fdjjg.com/
